2019-08-16 10:35:54

Fluidized bed granulation equipment is currently widely used in pharmaceutical production processes, with significant advantages. This method combines mixing, granulation, drying, and even coating operations in a fully enclosed container. Compared with other wet processes, it has the characteristics of simple process, short operation time, and low labor intensity.

2019-08-14 10:34:46

For the viscous medicinal materials in the compound formulation, other medicinal materials can be mixed and crushed into coarse powder first, then the viscous medicinal materials can be added and mixed evenly, and then crushed once to achieve the purpose of crushing. When there is too much sticky medicinal material in individual crushing or compound formulation, the repeated operation method of dr...

2019-07-13 10:32:02

Fluidized bed coating equipment is a new type of particle coating equipment that organically combines fluidization coating technology and spray technology. It is widely used for film slow and controlled release, skeleton slow and controlled release capsules, pill coating, particle and powder coating.

2019-03-14 10:21:25

Hollow blade dryer is a horizontal stirring type dryer that mainly conducts heat, with wedge-shaped hollow blades densely arranged on the internal hollow shaft. The blade dryer has been developed abroad for many years, and this model has been developed in two structures, dual axis and four axis, with multiple specifications of series products.

2018-06-04 10:19:27

Starting from the concept of fluidized bed coating technology, this article evaluates and analyzes the pharmaceutical negative pressure bottom spraying fluidized bed coating machine of Jiafa Company, with the aim of enabling pharmaceutical users to have a more systematic understanding of the bottom spraying fluidized bed coating machine.

2018-05-11 16:56:47

The melting point of low melting point materials is best between 40 ° C-90 ° C. Low melting points can easily cause particle deformation and affect the physical stability of particles. Excessive temperature can easily cause materials to overheat and accelerate decomposition. Cooling rate, try to accelerate the solidification rate as much as possible to prevent adhesion between particles.