产品展示
当前位置:首页 > 产品展示
Contact
地 址:中国江苏常州三河口工业园区
联系人:邹龙贵
手 机:13606122988
电 话:0519-88672258 0519-88672258
传 真:0519-88672218
E-mail:czjf2008@263.net
网 址:www.jf-granulator.com
产品展示
LPG高速离心喷雾干燥机

详细信息


应用概述 General of applications

★喷雾干燥是液体工艺成形和干燥工业中最广泛应用的工艺。最适用于从溶液、乳浊液、悬浮液和可泵性糊状液体原料中生成粉状、颗粒状产品。因此,当成品的颗粒大小分布、残留水分含量、堆积密度和颗粒形状必须符合精确的标准时,喷雾干燥是一道十分理想的工艺。

★Spray drying is a wide applied process in liquid process shaping and drying industry. Particularly it is suitable for producing powder, granule or block solid product from solution, emulsion, suspending liquid and pumped paste liquid. Therefore when the distribution of granule size, final moisture, bulk density, granule shape of finished product must be conformed to accuracy standard, the spray drying is an ideal process.


设备特点 Features of equipment

★干燥速度快,料液经雾化后表面积大大增加,在热风气流中,瞬时就可蒸发95%-98%的水分,完成干燥时间仅需5-40秒钟,特别适用于热敏性物料的干燥。

★产品具有良好的分散性、流动性或溶解性,由于干燥过程是在空气中完成的,所以基本能保持于液滴相近似的球状,良好的分散性、流动性和溶解性,使产品纯度高质量好。

★生产过程简化,操作控制方便。通常用于湿含量40-60%的溶液(特殊物料可达90%)能一次干燥成粉粒产品,干燥后不需粉碎和筛选,减少生产工序,提高产品纯度。对产品粒径,松密度、水份,在一定范围内可通过改变操作条件进行调整,简化了生产工艺流程,控制和管理都很方便。

★Quick drying speed, the surface area of material liquid through atomizing is increased greatly. In hot air stream, 95% to 98% of moisture can be evaporated at the moment. Particularly suitable to finish drying thermal sensitive material.

★The product made by the machine has good uniformity, fluidity, solubility, high pure, and high quality.

★The productive process is simple and the operation control is very convenient. For liquid containing 40-60% of damp(for special material, may be 90%), it can be dried to powder product through drying one time. After dried, it is not necessary to crush and sieve. So it reduces productive procedure and raises the purity of product. For the size, bulk density and moisture of product can be adjusted within certain scope through changing operation condition. The control and management are very convenient.


规格Specification 项目Item52550100150200-300

入口温度

Tep of inlet air

≤350℃

出口温度

Tep of outlet air

≤80℃~90℃

蒸发量(kg/h)

Evaporated capacity

5 25 50 100 150 200-300

传动形式

Transmitted

压缩空气驱动 Compressed air 机械传动 (Machine transmission)

转速(rpm)

Rotating speed

25000 22000 21500 18000 18000 15000

喷雾盘直径(mm)

Dia.of atomizing disk

50 120 120 120 150 180-340

热源

Heat source

Electricity

Electricity

电+蒸汽、燃油、煤汽

Electricity+steam,oil fuel,gas

电+蒸汽

Electricity+steam

电+蒸汽、燃油、煤汽

Electricity+steam,oil fuel,gas

由用户自行解决

By customer

电加热功率(kw)

Power of electric heater

9 45 60 81 99 

干粉回收率(%)

Yield of dry power

≥95 ≥95 ≥95 ≥95 ≥95 ≥95

主机尺寸

Installation size for reference

A(mm) 1000 1290 1730 2500 2800

根据实际情况确定

Decided in accordance with actual condition

B(mm) 2100 3410 4245 5300 6000
C(mm) 2300 4260 4645 6000 6700
ØD(mm) 1060 1800 2133 2560 2860
E1(mm) 1050 1200 1640 2100 2180
E2(mm) 1050 1200 1640 2100 2180
F(mm) 750 1000 1250 1750 1970
G(mm) 530 1700 1750 1930 2080
H(mm) 530 1300 1800 2600 3050
l(mm) 530 1550 1600 1780 1960


所有参数仅作参考,视物料情况,本公司拥有变更权利,并不另行通知。

All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardon!


安装参考图 Reference drawing of installation



上一页:KJZ快速混合制粒机

下一页:LT系列料筒

版权所有:©2009-2018 常州市佳发制粒干燥设备有限公司